United Moulders Pro Sensor Elite Inflator

£ 10.00£ 15.00 ex.VAT

The UML Pro Sensor Elite Inflator is available in Auto or Manual option. Both are with D Post fitting and 1/2″ UNF cylinder thread.

Clear
SKU: UMLPSELITE Category:

Description

The United Moulders Pro Sensor Elite Inflator is available in either automatic or manual versions.

RTS supply the inflator as pictured with United Moulders Pro Sensor Elite Inflator Op Head and a IU-UM1601 Gas Seal Washer. The Auto also comes with a UMA8050 auto cartridge.

Limited stock is held, with 1/2″ UNF thread for CO2 Cylinder and D Post fitting. All stock is right hand pull. For left hand pull please contact first.

Technical Information on the United Moulders Pro Sensor Elite AUTO Inflator can be found on the manufacturer’s website.

Manual info on this link.

The United Moulders automatic system is activated when the cartridge comes in to contact with water. The mechanism inside the cartridge is a compressed spring held in place by a paper element. When the paper element makes contact with water the spring is released and a plunger is pushed forward. This pushes a cutter in to the CO2 Cylinder allowing the release of the gas and inflation of the bladder of the lifejacket. The auto system also has a manual backup that can be activated by pulling the toggle.

United Moulders Pro Sensor Elite Inflator
Pro Sensor Elite Two-Point Indication System

A range of spares for the Pro Sensor Elite can be found here on the RTS Website.

 

 

 

 

 

The manual version only has one indicator for the CO2 Cylinder.

Additional information

Model

Pro Sensor Elite Auto, Pro Sensor Elite Manual

Reviews

There are no reviews yet.

Be the first to review “United Moulders Pro Sensor Elite Inflator”