The United Moulders Micro Manual Inflator was launched in 2017. It is designed for use on lifejackets where automatic inflation is not required.
RTS hold stock in the United Moulders Micro Manual Inflator as pictured with:
United Moulders Micro Manual Op Head which takes a 1/2″ UNF CO2 Cylinder.
United Moulders UM6002 retaining clip.
“D Post” fitting.
If you require other variations please get in touch.
This inflator will not activate on contact with water and the user is required to activate this inflator by pulling firmly on the yellow pull toggle to inflate the life jacket.
Technical Information on the United Moulders Micro Manual Inflator can be found on the manufacturer’s website.
The Micro Manual lifejacket inflator is a small, strong, lightweight product used in both commercial and leisure applications. The unit is manually activated with the minimum pull force required to initiate lifejacket inflation. The product is approved in accordance with the ISO12402 Part 7 standard requirement for lifejackets.
A range of spares can be found here on the RTS website.