UML Mk5i Cartridge UMA 5001 Pro Sensor

£ 5.95 ex.VAT

The Pro Sensor UMA 5001 has a black end cap and should not be used on the MK5 Inflator. It is only for the UML Pro Sensor.

SKU: UMA5001 Category:


UML Mk5i Cartridge UMA 5001 Pro Sensor for re-arming life jackets which use the United Moulders Pro Sensor Automatic Inflator.

This UML Mk5i Cartridge UMA 5001 Pro Sensor is also available as a multi pack on this link.

All UML cartridges supplied by RTS are fresh stock. Please feel free to enquire before you buy to check the dates of our products. Current Stock Replace by January 2028 or later.

The Mk5i cartridge comes in two models and users need to be aware of the differences.

UMA 5000 with Green end cap. This is for the UML Mk5 model of inflator and can be found here on a different listing.

UML 5001 with BLACK END CAP. This is for the UML Pro Sensor Auto inflator.

Think of the Mk5i as improved. It has been slightly remodelled from the old version so that the bottom around the cap is smoother. The new Mk5i Cartridge contains a new paper element resistant to the negative effects of high humidity. Nitrile sealing gives added security against accidental water ingress.

Although the expiry date may be in excess of 3 years from the date of first use it is important to be mindful of the guidance given by United Moulders with regards to replacing the Mk5i Cartridge.

Recreational Use: Replace every two years or by the REPLACE BY date whichever is sooner. It is recommended your lifejacket is inspected annually. Refer to your lifejacket manual and keep to service intervals.

Commercial/Professional Use: Replace annually. Do not exceed the REPLACE BY date in any 1-year period. SOLAS approved life jackets are required to be serviced by an authorised service station annually.

UML Pro Sensor Information

UML Mk5i Cartridge UMA 5001 Pro Sensor







There are no reviews yet.

Be the first to review “UML Mk5i Cartridge UMA 5001 Pro Sensor”